Wakeboarding Tricks

CNC Stomp Pad 8 | Sanding & Spikes | CNC Videos

Admin — Tue, 22 Nov 2011 17:03:35 +0000

During this CNC Video Segment we sand our CNC Stomp Pad with a Dual Action (DA) sander. We are taking out any deep scratches and giving it a matte finish. The CNC Plasma Cut part then is taken over to a stand. We look at different traction spikes and how they will look. After selecting a spike type, we start laying them out. We layout some marks where we will drill holes in the next video. www.cncinformation.com

MasterCraft X25 Wakeboard Boat at C & C Boat Works

Admin — Fri, 18 Nov 2011 01:40:51 +0000

The new MasterCraft X25 wakeboard boat offers innovative seating, a smooth ride and an epic curl for surfing. Find it at C & C Boat Works in Crosslake, MN.

MasterCraft X25 Wakeboard Boat at C & C Boat Works

Admin — Sat, 12 Nov 2011 14:22:14 +0000

The new MasterCraft X25 wakeboard boat offers innovative seating, a smooth ride and an epic curl for surfing. Find it at C & C Boat Works in Crosslake, MN.

Wakeboarding Tricks & Air Time Lake Byllesby

Admin — Thu, 10 Nov 2011 19:10:11 +0000

Tyler, Ryan, and Brandon wakeboarding for the last time of the season. Shot on location Lake Byllesby, MN. Thx Ryan for taking us out on your boat so much this year! “I Don’t Wanna Stop” by Ozzy Osbourne “Click Clik Boom” by Saliva

CNC Stomp Pad 9 | Drill Holes | CNC Learning Videos | CNC

Admin — Fri, 04 Nov 2011 07:29:53 +0000

In this video we drill the holes in our CNC Stomp Pad. We need to add the traction spikes and they are really a screw and nut. We drill the holes then clean them out. We bend the stomp pad while drilling and we must hammer it flat next. A quick DA Sanding to make the pad look good, then we are on the the next step which is finalizing the CNC stomp pad. www.cncinformation.com

Used 2000 Moomba Outback LS Wakeboard boat For Sale. Lake Lanier, GA

Admin — Thu, 03 Nov 2011 09:29:51 +0000

This is a nice 2000 Moomba Outback LS with tower and all the great options. It runs great as you can tell from the video and has just been completely serviced including an oil change and a new impeller. We are asking $24500 for the boat including a nice factory trailer. Call Justin Brown for more information at 678-316-0447.

MasterCraft X25 Wakeboard Boat at C & C Boat Works

Admin — Mon, 31 Oct 2011 15:30:33 +0000

The new MasterCraft X25 wakeboard boat offers innovative seating, a smooth ride and an epic curl for surfing. Find it at C & C Boat Works in Crosslake, MN.

MasterCraft X25 Wakeboard Boat at C & C Boat Works

Admin — Sun, 30 Oct 2011 17:29:37 +0000

The new MasterCraft X25 wakeboard boat offers innovative seating, a smooth ride and an epic curl for surfing. Find it at C & C Boat Works in Crosslake, MN.

Wakeboarding Tricks & Air Time Lake Byllesby

Admin — Sun, 30 Oct 2011 13:08:03 +0000

radioshack yamaha AR230 wakeboard RC boat 9.6 volt

Admin — Sat, 29 Oct 2011 19:30:09 +0000

test of radio shack rc boat in yard pond and large retention pond; totally stock 1600 ma Nmhi battery